Diponegoro University, Indonesia
BibTex Citation Data :
@article{Transient20488, author = {Fatma Damayanti}, title = {PERANCANGAN TRAFFIC LIGHT MENGGUNAKAN MODUL FIELD PROGRAMMABLE GATE ARRAY XILINX NEXYS 3}, journal = {Transient: Jurnal Ilmiah Teknik Elektro}, volume = {7}, number = {2}, year = {2019}, keywords = {Traffic Light, FPGA, Xilinx, Nexys 3.}, abstract = { Traffic light is used to set transferring of the vehicle at the road junction to avoid congestion. Traffic light in Indonesia has fixed time without regard to congestion. This Final Assignment, advanced traffic light with limit switch sensor. The limit switch sensors were installed at each strip to detect heavy vehicles queue. The limit switch will be processed on FPGA Xilinx Nexys 3. Traffic light generates output, there are seven segments and LED used 1 Hz frequency. Seven segments used 4 digits to indicate lane North, South, East and West. Each digit on seven segments shown the turnover used 200 Hz frequency. Limit switch affect outputs on the length of time Green LED lights up. If the value of the limit switch = 1, the Green LED on certain lanes lights up for 7 seconds. If the value of the limit switch = 0, the Green LED on certain lanes light up for 5 seconds. The results on the Final Assignment is take two seconds of extra time for Green LED lights up if the value of the limit switch = 1. The value of the limit switches only take effect when the Green LED is lit for each lane. }, issn = {2685-0206}, pages = {678--685} doi = {10.14710/transient.v7i2.678-685}, url = {https://ejournal3.undip.ac.id/index.php/transient/article/view/20488} }
Refworks Citation Data :
Traffic light is used to set transferring of the vehicle at the road junction to avoid congestion. Traffic light in Indonesia has fixed time without regard to congestion. This Final Assignment, advanced traffic light with limit switch sensor. The limit switch sensors were installed at each strip to detect heavy vehicles queue. The limit switch will be processed on FPGA Xilinx Nexys 3. Traffic light generates output, there are seven segments and LED used 1 Hz frequency. Seven segments used 4 digits to indicate lane North, South, East and West. Each digit on seven segments shown the turnover used 200 Hz frequency. Limit switch affect outputs on the length of time Green LED lights up. If the value of the limit switch = 1, the Green LED on certain lanes lights up for 7 seconds. If the value of the limit switch = 0, the Green LED on certain lanes light up for 5 seconds. The results on the Final Assignment is take two seconds of extra time for Green LED lights up if the value of the limit switch = 1. The value of the limit switches only take effect when the Green LED is lit for each lane.
Article Metrics:
Last update:
Penulis yang menyerahkan naskah perlu menyetujui bahwa hak cipta dari artikel tersebut akan diserahkan ke TRANSIENT: Jurnal Ilmiah Teknik Elektro dan Departemen Teknik Elektro, Universitas Diponegoro sebagai penerbit jurnal. Hak cipta mencakup hak untuk mereproduksi dan mengirimkan artikel dalam semua bentuk dan media, termasuk cetak ulang, foto, mikrofilm, dan reproduksi serupa lainnya, serta terjemahannya.
TRANSIENT: Jurnal Ilmiah Teknik Elektro dan Departemen Teknik Elektro, Universitas Diponegoro dan Editor berusaha keras untuk memastikan bahwa tidak ada data, pendapat, atau pernyataan yang salah atau menyesatkan dipublikasikan di jurnal. Dengan cara apa pun, isi artikel dan iklan yang diterbitkan dalam TRANSIENT: Jurnal Ilmiah Teknik Elektro adalah tanggung jawab tunggal dan eksklusif masing-masing penulis dan pengiklan.
Formulir Transfer Hak Cipta dapat diunduh di sini: [Formulir Transfer Hak Cipta Transient]. Formulir hak cipta harus ditandatangani dan dikirim ke Editor dalam bentuk surat asli, dokumen pindaian atau faks:
Dr. Wahyudi (Ketua Editor)Departemen Teknik Elektro, Universitas Diponegoro, IndonesiaJl. Prof. Sudharto, Tembalang, Semarang 50275 IndonesiaTelepon/Facs: 62-24-7460057Email: transient@elektro.undip.ac.id