PERBEDAAN KADAR TIMBAL (Pb) DALAM DARAH BERDASARKAN JENIS PEKERJAAN PADA PEKERJA INDUSTRI PENGECORAN LOGAM DI CV. BONJOR JAYA, CEPER, KLATEN

Vifta Dian Lestari; Onny Setiani; Niki Astorina Yunita Dewanti

doi:10.14710/jkm.v3i3.12745

DOI: https://doi.org/10.14710/jkm.v3i3.12745

PERBEDAAN KADAR TIMBAL (Pb) DALAM DARAH BERDASARKAN JENIS PEKERJAAN PADA PEKERJA INDUSTRI PENGECORAN LOGAM DI CV. BONJOR JAYA, CEPER, KLATEN

*Vifta Dian Lestari - , Indonesia

Onny Setiani - , Indonesia

Niki Astorina Yunita Dewanti - , Indonesia

Received: 25 Jul 2016; Published: 13 Dec 2017.

BibTex Citation Data :

@article{JKM12745,
    author = {Vifta Lestari and Onny Setiani and Niki Dewanti},
    title = {PERBEDAAN KADAR TIMBAL (Pb) DALAM DARAH BERDASARKAN JENIS PEKERJAAN PADA PEKERJA INDUSTRI PENGECORAN LOGAM DI CV. BONJOR JAYA, CEPER, KLATEN},
    journal = {Jurnal Kesehatan Masyarakat},
  volume = {3},
    number = {3},
    year = {2017},
    keywords = {type of work, blood lead level, workers, foundry industry in Klaten},
    abstract = { Metal foundry industry workers is one of the people who are at risk of lead exposure as the effect of air pollution by lead in workplace. These workers are exposed to lead every day as a result of their activities likes melting, stamping, and finishing process at this industry. The aim of the research is to know the difference about blood lead level in workers at the melting section, stamping section and finishing section in CV. Bonjor Jaya, Ceper, Klaten. This observational research with a cross sectional approach. The population is 34 workers in CV. Bonjor Jaya and 31 sample selected by purposive sampling method. Data analysis is done by using Krusskal Wallis test with significance value 5%. Result showed that air lead levels in each section are 0,208 mg/Nm 3 (melting), 0,212 mg/Nm 3 (stamping) and 0,037 mg/Nm 3 (finishing) as well as the average of blood lead level in workers at the each section are 15,97 µg/l (melting), 18,10 µg/l (stamping) and 10,54 µg/l (finishing). Based on statistic analysis was known that p value = 0,320 with α 0,05, this result show that there is no significant difference of blood lead level based on type of work in metal foundry workers in CV. Bonjor Jaya, Ceper, Klaten. Based on this research concluded that average of blood lead level on workers are above normal (CDC=10 μg/dl). Suggestion for metal foundry industry workers to always use a standard mask to reducing lead exposure in the body. },
   issn = {2356-3346},   pages = {819--831}  doi = {10.14710/jkm.v3i3.12745},
    url = {https://ejournal3.undip.ac.id/index.php/jkm/article/view/12745}
}

Citation Format:

Abstract

Metal foundry industry workers is one of the people who are at risk of lead exposure as the effect of air pollution by lead in workplace. These workers are exposed to lead every day as a result of their activities likes melting, stamping, and finishing process at this industry. The aim of the research is to know the difference about blood lead level in workers at the melting section, stamping section and finishing section in CV. Bonjor Jaya, Ceper, Klaten. This observational research with a cross sectional approach. The population is 34 workers in CV. Bonjor Jaya and 31 sample selected by purposive sampling method. Data analysis is done by using Krusskal Wallis test with significance value 5%. Result showed that air lead levels in each section are 0,208 mg/Nm³(melting), 0,212 mg/Nm³(stamping) and 0,037 mg/Nm³(finishing) as well as the average of blood lead level in workers at the each section are 15,97 µg/l (melting), 18,10 µg/l (stamping) and 10,54 µg/l (finishing). Based on statistic analysis was known that p value = 0,320 with α 0,05, this result show that there is no significant difference of blood lead level based on type of work in metal foundry workers in CV. Bonjor Jaya, Ceper, Klaten. Based on this research concluded that average of blood lead level on workers are above normal (CDC=10 μg/dl). Suggestion for metal foundry industry workers to always use a standard mask to reducing lead exposure in the body.

Fulltext View|Download

Keywords: type of work, blood lead level, workers, foundry industry in Klaten

Article Metrics:

Article Info

Section: Kesehatan Lingkungan

In Vol 3, No 3 (2015): JULI

Recent articles

GAMBARAN POTENSI MASYARAKAT PENGGUNA PELAYANAN KESEHATAN TRADISIONAL DI WILAYAH KELURAHAN ROWOSARI KECAMATAN TEMBALANG KOTA SEMARANG ANALISIS KUALITAS PELAYANAN REHABILITASI SESUAI STANDAR PELAYANAN BAGI PENYALAH GUNA NAPZA DI RUMAH DAMAI, GUNUNGPATI, SEMARANG PENGARUH MOTIVASI DAN PERSEPSI PELAYANAN TERHADAP KETERATURAN ANTENATAL CARE PADA IBU HAMIL DI PUSKESMAS NGEMPLAK SIMONGAN KOTA SEMARANG PADA TRI WULAN I TAHUN 2015 HUBUNGAN AKTIVITAS FISIK DENGAN GANGGUAN MENSTRUASI WANITA PASANGAN USIA SUBUR DI DESA TEMANGGUNG KECAMATAN KALIANGKRIK KABUPATEN MAGELANG TAHUN 2015 FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN STATUS KESEMBUHAN PENDERITA TUBERKULOSIS PARU SURVEI KEBERADAAN FORMALIN PADA PRODUK PERIKANAN LAUT SEGAR YANG DIJUAL DI PASAR TRADISIONAL KOTA SEMARANG Survey of Formaldehyde Existence In Fresh Sea Fisheries Product Sold At Traditional Market Of Semarang City FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN KEBIASAAN DAN KUALITAS SARAPAN SISWA KELAS V DI SDN SENDANGMULYO 04 KECAMATAN TEMBALANG, SEMARANG TAHUN 2015 GAMBARAN PEMANFAATAN BILIK LAKTASI DI SARANA UMUM KOTA SEMARANG TAHUN 2015 HUBUNGAN LINGKUNGAN KELAS TERHADAP KELAINAN REFRAKSI MIOPIA PADA SISWA KELAS 5 SD DI SD X SEMARANG STUDI TENTANG PERILAKU OPERATOR DALAM KESIAPSIAGAAN PENANGGULANGAN BAHAYA KEBAKARAN DI PT. X SURALAYA PERBEDAAN KADAR TIMBAL (Pb) DALAM DARAH BERDASARKAN JENIS PEKERJAAN PADA PEKERJA INDUSTRI PENGECORAN LOGAM DI CV. BONJOR JAYA, CEPER, KLATEN HUBUNGAN ANTARA MASA KERJA DENGAN KADAR TIMBAL (Pb) DALAM DARAH PADA PEKERJA INDUSTRI PENGECORAN LOGAM CV. BONJOR JAYA DI DESA BATUR, CEPER, KLATEN Analisis Pelaksanaan Promosi Kesehatan Bagi Karyawan Berisiko Tinggi Penyakit Degeneratif Oleh Health Care Center PT Holcim Indonesia Tbk Cilacap Plant Analisis Faktor – Faktor yang Mempengaruhi Remaja Putri terhadap Perilaku Kekerasan dalam Pacaran di SMA “X” Kota Semarang More recent articles

Last update:

No citation recorded.

Last update:

No citation recorded.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kesehatan Masyarakat (JKM, p-ISSN: 2715-5617, e-ISSN:2356-3346) and Faculty of Public Health, Diponegoro University as the publisher of the journal. Copyright encompasses the rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

JKM journal and Faculty of Public Health, Diponegoro University, the Editors and the Advisory Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the JKM journal are the sole and exclusive responsibility of their respective authors and advertisers.

The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form JKM journal]
The copyright form should be signed originally and send to the Editorial Office in the form of original mail or scanned document to jkm@live.undip.ac.id.