Redesign Struktur Bangunan Gedung Utama Indonesia Manufacturing Center Berbasis Building Information Modeling 5D

Dinda Rizki Pratiwi; Okta Dewi Saputri; Bambang Setiabudi; Asri Nurdiana

doi:10.14710/pilars.3.4.2025.%p

DOI: https://doi.org/10.14710/pilars.3.4.2025.%25p

Redesign Struktur Bangunan Gedung Utama Indonesia Manufacturing Center Berbasis Building Information Modeling 5D

*Dinda Rizki Pratiwi - Department of Civil Infrastructure Engineering and Architectural Design, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia, 50275, Indonesia

Okta Dewi Saputri - Department of Civil Infrastructure Engineering and Architectural Design, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia, 50275, Indonesia

Bambang Setiabudi - Department of Civil Infrastructure Engineering and Architectural Design, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia, 50275, Indonesia

Asri Nurdiana - Department of Civil Infrastructure Engineering and Architectural Design, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia, 50275, Indonesia

Citation Format:

Abstract

The development of increasingly sophisticated technology forces evaluation of construction methods with the speedy development in Indonesia. Strengthened by PUPR Ministerial Regulation No. 22 of 2018 which requires the application of BIM in building construction. Therefore, this planning will center on redesign the Indonesia Manufacturing Center Main Building Project based on Building Information Modeling (BIM) which aims to understand and analyze structural work planning, cost estimation and scheduling. The methods used in this planning are planning data from the Indonesia Manufacturing Center Main Building Project, case studies and literature studies from various verified sources. The stages in preparing this Final Project start from load analysis and dimensional planning, followed by structural analysis with SAP 2000 and 3D modeling with Autodesk Revit. Then the volume results from Autodesk Revit are used for planning cost estimates and scheduling using Microsoft Excel and Microsoft Project which are integrated with Autodesk Naviswork. The results of this planning are a Cost Budget Plan including 11% VAT with a total price of IDR 36,656,464.219,89 and schedule with an implementation duration of 23 weeks.

Fulltext View|Download Email colleagues

Article Metrics:

Article Info

Section: Articles

Language : ID

In Vol 3, No 4 (2025): Desember

Badan Standardisasi Nasional. (2019). SNI-1727-2019 Beban Desain Minimum dan Kriteria terkait untuk Bangunan Gedung dan Struktur Lain. Jakarta: Badan Standardisasi Nasional
Badan Standardisasi Nasional. (2019). SNI-2847-2019 Persyaratan Beton Struktural untuk Bangunan. Jakarta: Badan Standardisasi Nasional
Badan Standardisasi Nasional. (2020). Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non gedung. Jakarta: Badan Standardisasi Nasional
Christiandava, A. R., & Azzahra, A. (2020). REDESIGN STRUKTUR GEDUNG HEAD OFFICE AWANN GROUP BERDASARKAN INTEGRASI BIM AUTODESK MELALUI REVIT, NAVISWORK, DAN SAP 2000. Semarang
Ferry, & Indrastuti. (2020). Penerapan Building Information Modelling (BIM) pada Proyek Pembangunan Workshop (Studi Kasus: Proyek Pembangunan Workshop Kapal di Sekupang). Journal of Civil Engineering and Planning, 1(1)
Firdaus, M. A., & Asalina, R. U. (2023). PERENCANAAN ULANG GEDUNG DEKANAT DAN PERKULIAHAN FAKULTAS KESEHATAN MASYARAKAT UNIVERSITAS DIPONEGORO DENGAN KONSEP BIM 3D. Semarang
Kementerian Pekerjaan Umum dan Perumahan Rakyat. (2018). PELATIHAN PERENCANAAN KONSTRUKSI DENGAN SISTEM TEKNOLOGI BUILDING INFORMATION MODELING (BIM). Bandung: Pusat Pendidikan dan Pelatihan SDA dan Konstruksi
Nelson, & Sekarsari, J. (2019). FAKTOR YANG MEMENGARUHI PENERAPAN BUILDING INFORMATION MODELING (BIM) DALAM TAHAPAN PRA KONSTRUKSI GEDUNG BERTINGKAT. Jurnal Mitra Teknik Sipil, 2
Putri, A. H., Anisah, & Handoyo, S. S. (2023). TINJAUAN MENDALAM TENTANG TEKNOLOGI BIM: KEUNGGULAN, TANTANGAN, DAN PELUANG DIMASA DEPAN. Prosiding Seminar Pendidikan Kejuruan dan Teknik Sipil (E-Journal), 1
Putri, I. Z., Wahiddin, & Sugiharti. (2021). MODIFIKASI PERENCANAAN GEDUNG TYPE B1 RUSUN GUNUNG ANYAR SURABAYA MENGGUNAKAN SOFTWARE PENDUKUNG BIM. Jurnal Online
Skripsi Manajemen Rekayasa Konstruksi Polinema, 2
Ramdani, I., Paikun, Rozandi, A., Budiman, D., & Vladimirovna, K. E. (2022). Implementasi Building Information Modeling (BIM) Pada Proyek Perumahan. Jurnal Teslink: Teknik Sipil dan Lingkungan, 4
Reviana. (2023). Penerapan Building Information Modeling (BIM) Menggunakan Software Autodesk Revit 2019 pada Pekerjaan Non Struktur (Studi Kasus : Gedung B Fakultas Ekonomi dan Bisnis Universitas Lampung). Bandar Lampung
Simatupang, P. H., Sir, T. M., Kompas, J. F., & Wadu, V. A. (2019). BUILDING INFORMATION MODELING (BIM) SOFTWARE PADA PERANCANGAN GEDUNG BETON BERTULANG UNTUK MENDUKUNG INDUSTRI 4.0 DALAM BIDANG JASA KONSTRUKSI. SEMINAR NASIONAL SAINS DAN TEKNIK FST UNDANA (SAINSTEK)
Wibowo, A. (2021). Evaluasi Penerapan Building Information Modeling (BIM) pada Proyek Konstruksi di Indonesia. Semarang
Yudi, A., Ulum, M. S., & Nugroho, M. T. (2020). PERANCANGAN DETAIL ENGINEERING DESIGN GEDUNG BERTINGKAT BERBASIS BUILDING INFORMATION MODELING (Studi Kasus: Asrama Institut Teknologi Sumatera). Media Komunikasi Teknik Sipil, 00

Last update:

No citation recorded.

Last update:

No citation recorded.

The copyright notice in the Journal of Civil and Architecture (Jurnal Sipil dan Arsitektur) confirms that all published articles, illustrations, and related content are protected by copyright. Each work displayed, be it the result of research, architectural design, or case studies in the civil and architectural fields, has a copyright owned by the author or related institution, which is marked with a symbol ©, year of publication, and the name of the copyright owner. The inclusion of this copyright notice aims to maintain the integrity of scientific works, prevent unauthorized use, and encourage respect for intellectual property rights in the academic and professional communities. We encourage readers to appreciate and cite these works appropriately.