PERBEDAAN TEKANAN DARAH DAN DENYUT NADI PEKERJA AKIBAT TEKANAN PANAS DI PENGECORAN LOGAM INDUKSI DAN KUPOLA CV. X KLATEN

Fitria Ardiani; Siswi Jayanti; Suroto Suroto

doi:10.14710/jkm.v3i3.12279

DOI: https://doi.org/10.14710/jkm.v3i3.12279

PERBEDAAN TEKANAN DARAH DAN DENYUT NADI PEKERJA AKIBAT TEKANAN PANAS DI PENGECORAN LOGAM INDUKSI DAN KUPOLA CV. X KLATEN

*Fitria Ardiani - , Indonesia

Siswi Jayanti - , Indonesia

Suroto Suroto - , Indonesia

Received: 28 Jun 2016; Published: 13 Dec 2017.

BibTex Citation Data :

@article{JKM12279,
    author = {Fitria Ardiani and Siswi Jayanti and Suroto Suroto},
    title = {PERBEDAAN TEKANAN DARAH DAN DENYUT NADI PEKERJA AKIBAT TEKANAN PANAS DI PENGECORAN LOGAM INDUKSI DAN KUPOLA CV. X KLATEN},
    journal = {Jurnal Kesehatan Masyarakat},
  volume = {3},
    number = {3},
    year = {2017},
    keywords = {heat stress, blood pressure, pulse rate, metal casting},
    abstract = { Heat stress in metal casting induction and kupola CV.X Klaten exceeds the threshold value according to the regulation of Minister manpower PER.13/MEN/X/2011 is>28 0 C for moderate workload, with setting work time per hour for 75-100%. The purpose of this research is to know difference of blood pressure and pulse rate of workers due to heat stress in metal casting induction and kupola CV.X Klaten. Explanatory research type (to explain) with cross sectional approach.The independent variable is heat stress and the dependent variable is blood pressure and pulse rate. This research measurements using Questemp 34 to hot pressure gauged and digital tensimeter to measure blood pressure and pulse rate. Total sampling of entire population of workers in smelting and metal moulding induction and kupola amounted to 40 workers. Data analysis using univariate analysis and bivariate. The results showed that there is difference of systolic blood pressure, diastolic, arterial, and pulse rate in induction and kupola workers, statistical tests of Independent samples t test obtained (p   value 0,017), (p   value 0,030), (p   value 0,001) and (p   value 0,001). Conclusion of this research is normal blood pressure in induction workers a number of 65% from 20 workers, in kupola 55% of 20 workers. Normal pulse rate of induction workers is 80% of 20 workers, in kupola 90% of 20 workers. As a suggestion is provision of health care facilities for workers through cooperative teamwork metal casting business owners with the nearest health service. },
   issn = {2356-3346},   pages = {419--427}  doi = {10.14710/jkm.v3i3.12279},
    url = {https://ejournal3.undip.ac.id/index.php/jkm/article/view/12279}
}

Citation Format:

Abstract

Heat stress in metal casting induction and kupola CV.X Klaten exceeds the threshold value according to the regulation of Minister manpower PER.13/MEN/X/2011 is>28⁰C for moderate workload, with setting work time per hour for 75-100%. The purpose of this research is to know difference of blood pressure and pulse rate of workers due to heat stress in metal casting induction and kupola CV.X Klaten. Explanatory research type (to explain) with cross sectional approach.The independent variable is heat stress and the dependent variable is blood pressure and pulse rate. This research measurements using Questemp 34 to hot pressure gauged and digital tensimeter to measure blood pressure and pulse rate. Total sampling of entire population of workers in smelting and metal moulding induction and kupola amounted to 40 workers. Data analysis using univariate analysis and bivariate. The results showed that there is difference of systolic blood pressure, diastolic, arterial, and pulse rate in induction and kupola workers, statistical tests of Independent samples t test obtained (p value 0,017), (p value 0,030), (p value 0,001) and (p value 0,001). Conclusion of this research is normal blood pressure in induction workers a number of 65% from 20 workers, in kupola 55% of 20 workers. Normal pulse rate of induction workers is 80% of 20 workers, in kupola 90% of 20 workers. As a suggestion is provision of health care facilities for workers through cooperative teamwork metal casting business owners with the nearest health service.

Fulltext View|Download

Keywords: heat stress, blood pressure, pulse rate, metal casting

Article Metrics:

Article Info

Section: Keselamatan dan Kesehatan Kerja

In Vol 3, No 3 (2015): JULI

Recent articles

GAMBARAN POTENSI MASYARAKAT PENGGUNA PELAYANAN KESEHATAN TRADISIONAL DI WILAYAH KELURAHAN ROWOSARI KECAMATAN TEMBALANG KOTA SEMARANG Analisis Hubungan Gaya Kepemimpinan dan Motivasi dengan Kinerja Pegawai RumahSakit Bhayangkara Tk. I Raden Said Sukanto Jakarta HUBUNGAN PENGETAHUAN DAN SIKAP WANITA PUS DENGAN KEJADIAN PERNIKAHAN DINI DI DESA LANJAN KECAMATAN SUMOWONO KABUPATEN SEMARANG TAHUN 2013 HUBUNGAN BEBERAPA FAKTOR DENGAN PERILAKU SEKSUAL BERISIKO IMS PADA WARIA BINAAN PONDOK PESANTREN (PONPES) WARIA SENIN- KAMIS YOGYAKARTA TAHUN 2015 HUBUNGAN SOSIODEMOGRAFI DAN LINGKUNGAN FISIK DENGAN KEJADIAN DEMAM BERDARAH DEGUE (DBD) PADA MASYARAKAT PESISIR PANTAI KOTA TARAKAN (Studi Kasus Pada Daerah Buffer Kantor Kesehatan Pelabuhan Kelas II Tarakan) The Correlation of Sociodemographic and Ph Hubungan Faktor Host (Umur 6 Bulan-14 Tahun) Dan Keberadaan Vektor Dengan Kejadian Demam Berdarah Dengue di Wilayah Kerja Puskesmas Kedungmundu Semarang Relationship Of Host Factors (Ages 6 Months - 14 Years) And Existence Vector With Dengue Hemorrhagic FAKTOR-FAKTOR YANG BERHUBUNGAN DENGAN KEBIASAAN DAN KUALITAS SARAPAN SISWA KELAS V DI SDN SENDANGMULYO 04 KECAMATAN TEMBALANG, SEMARANG TAHUN 2015 Hubungan Asupan Energi, Asupan Protein, dan Kadar Hemoglobin dengan Produktivitas Kerja Wanita Petani Kelurahan Tegalroso, Kabupaten Temanggung Tahun 2015 ANALISIS FAKTOR-FAKTOR KESALAHAN EDITING BERITA PADA WARTAWAN MEDIA CETAK DI PT X HUBUNGAN GERAKAN REPETITIF DAN LAMA KERJA DENGAN KELUHAN CARPAL TUNNEL SYNDROME PADA MAHASISWA TEKNIK ARSITEKTUR Pengaruh Variasi Lama Waktu Kontak Dan Diameter Media Karang Jahe (Acropora Sp.) Terhadap Penurunan Kadar Logam Chromium (Cr) Limbah Cair Batik Home IndustryKota Pekalongan HUBUNGAN KONDISI LINGKUNGAN FISIK RUMAH DAN PERILAKU ANGGOTA KELUARGA DENGAN KEJADIAN PNEUMONIA PADA BALITA (Studi Kasus di Wilayah Kerja Puskesmas Magelang Selatan Kota Magelang) Faktor – Faktor yang Berhubungan dengan Perilaku Seks Berisiko HIV/AIDS pada Tenaga Kerja Bongkar Muat (TKBM) di Pelabuhan Tanjung Emas Semarang HUBUNGAN ANTARA PERSEPSI MASYARAKAT TERHADAP PROGRAM “WARGA PEDULI AIDS” DENGAN PERILAKU PENCEGAHAN PENULARAN HIV/AIDS DI KELURAHAN PETERONGAN, KOTA SEMARANG More recent articles

Last update:

No citation recorded.

Last update:

No citation recorded.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kesehatan Masyarakat (JKM, p-ISSN: 2715-5617, e-ISSN:2356-3346) and Faculty of Public Health, Diponegoro University as the publisher of the journal. Copyright encompasses the rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

JKM journal and Faculty of Public Health, Diponegoro University, the Editors and the Advisory Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the JKM journal are the sole and exclusive responsibility of their respective authors and advertisers.

The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form JKM journal]
The copyright form should be signed originally and send to the Editorial Office in the form of original mail or scanned document to jkm@live.undip.ac.id.