skip to main content

PENERAPAN DIAGRAM KONTROL MEWMA DALAM PENGENDALIAN KUALITAS PRODUKSI KERIPIK SINGKONG PADA UMKM DI KOTA SEMARANG

*Nesari Nesari  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Mustafid Mustafid  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Tatik Widiharih  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Open Access Copyright 2022 Jurnal Gaussian under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract
Quality is the main thing that needs to be considered by every company. Ceriping Bintang Putra Bu Slamet is an UMKM (Usaha Mikro, Kecil dan Menengah) that produces cassava chips. During production, there are three quality characteristics, namely large crumbs defects, small crumbs, and chips sticking together. It is important to control these defects to produce quality products according to customer needs. This research was conducted from July to August 2021. The purpose of this study was to control the production quality of cassava chips using the Multivariate Exponentially Weighted Moving Average (MEWMA) control chart and multivariate process capability analysis. The MEWMA control chart is used to detect the shift in the process average which is more sensitive using weights (λ), while the process capability analysis is used to determine the process performance. The implementation of the MEWMA control chart is carried out in two stages, namely phase I control to obtain the optimal weighting and control limits so that it can be used in phase II control to monitor the average process for the next period. Based on the results of the analysis, the optimal weighting is λ =0,4 with BKA=201,7434, GT=113,538, and BKB=0 in phase I control. Then, the results of phase II control show a shift in the average process in a better direction. In addition, the results of the process capability analysis show an improvement in the performance of the production process from July 2021 to August 2021 with MCpm values of 0,535 and 1,147
Fulltext View|Download
Keywords: Control chart; multivariate control; Multivariate Exponentially Weighted Moving Average (MEWMA); UMKM; multivariate process capability

Article Metrics:

  1. Assauri, S. 2004. Manajemen Produksi dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia
  2. Daniel, W. W. 1989. Statistika Non Parametrik Terapan. Jakarta: PT. Gramedia
  3. Johnson, R. A. dan Wichern, D. W. 2007. Applied Multivariate Statistical Analysis Sixth Edition. United States of America: Pearson Education
  4. Khoo, M. B. C. 2004. An Extension for the Univariate Exponentially Weighted Moving Average Control Chart. Jurnal Matematika UTM Vol. 20, No. 1, Hal: 43-48. https://www.researchgate.net/publication/26605750_An_Extension_for_the_Univariate_Exponentially_Weighted_Moving_Average_Control_Chart
  5. Montgomery, D. C. 2013. Statistical Quality Control (Seventh Edition). Singapore: John Wiley & Sons
  6. Morrison, D. 1990. Multivariate Statistical Methods (Third Edition). New York: Mc Graw Hill Publishing Company
  7. Taam, W., Subbaiah, P., dan Liddy, J. W. 1993. A Note on Multivariate Capability Indices. Journal of Applied Statistics Vol. 20, No. 3, Hal: 339-351. https://doi.org/10.1080/02664769300000035
  8. Testik, M. C., Runger, G. C., dan Borror, C. M. 2003. Robustness Properties of Multivariate EWMA Control Charts. Quality and Reliability Engineering International Vol. 19, No. 1, Hal: 31-38. https://doi.org/10.1002/qre.49
  9. Zahid, M. A. dan Sultana, A. 2008. Assessment and Comparison of Multivariate Process Capability Indices in Ceramic Industry. Journal of Mechanical Engineering Vol. ME39, No. 1, Hal: 18-25
  10. https://www.banglajol.info/index.php/JME/article/view/1829

Last update:

No citation recorded.

Last update:

No citation recorded.