Perencanaan Ulang Struktur Gedung RSI PKU Muhammadiyah Pekalongan Berbasis Building Information Modelling (BIM) 5D

Elsi Mayastri Sinaga; Februardo Wijaya Laksamana Arief Haryono; Bambang Setiabudi; Tri Susanto

doi:10.14710/pilars.3.3.2025.160-173

DOI: https://doi.org/10.14710/pilars.3.3.2025.160-173

Perencanaan Ulang Struktur Gedung RSI PKU Muhammadiyah Pekalongan Berbasis Building Information Modelling (BIM) 5D

*Elsi Mayastri Sinaga - Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

Februardo Wijaya Laksamana Arief Haryono - Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

Bambang Setiabudi - Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

Tri Susanto - Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

BibTex Citation Data :

@article{PILARS51627,
    author = {Elsi Sinaga and Februardo Haryono and Bambang Setiabudi and Tri Susanto},
    title = {Perencanaan Ulang Struktur Gedung RSI PKU Muhammadiyah Pekalongan Berbasis Building Information Modelling (BIM) 5D},
    journal = {Jurnal Sipil dan Arsitektur},
  volume = {3},
    number = {3},
    year = {2025},
    keywords = {},
    abstract = { Building construction planning and design by implementing Building Information Modeling (BIM) is a new method in the industrial era 4.0 that can help accelerate and simplify the planning process of a construction project. This is needed because there are often weaknesses in the planning and implementation of construction projects that cause failure in them, plus the increase in infrastructure development in Indonesia which is also supported by the development of the 4.0 era. Therefore, this Final Project report is intended to re-plan the structure of the RSI PKU Muhammadiyah Pekalongan Building by implementing Etabs structural analysis software and BIM software integrated with Revit and Navisworks. This re-planning is based on several rules, namely SNI 2847-2019 regarding structural concrete requirements, SNI 1727-2020 regarding minimum load reviews, and SNI 1726-2019 regarding earthquake strength in buildings and non-buildings, which will then be analyzed using Etabs against these requirements, then a 3-dimensional model of the BIM-based building is created through Revit, and the use of Navisworks to plan project scheduling. It is hoped that through this Final Assignment, it can be proven that project planning will be more efficient and easier with BIM integration along with the development of infrastructure in Indonesia and can minimize weaknesses and failures during its implementation. },
   issn = {2988-5973},   pages = {160--173}  doi = {10.14710/pilars.3.3.2025.160-173},
    url = {https://ejournal3.undip.ac.id/index.php/pilars/article/view/51627}
}

Citation Format:

Abstract

Building construction planning and design by implementing Building Information Modeling (BIM) is a new method in the industrial era 4.0 that can help accelerate and simplify the planning process of a construction project. This is needed because there are often weaknesses in the planning and implementation of construction projects that cause failure in them, plus the increase in infrastructure development in Indonesia which is also supported by the development of the 4.0 era. Therefore, this Final Project report is intended to re-plan the structure of the RSI PKU Muhammadiyah Pekalongan Building by implementing Etabs structural analysis software and BIM software integrated with Revit and Navisworks. This re-planning is based on several rules, namely SNI 2847-2019 regarding structural concrete requirements, SNI 1727-2020 regarding minimum load reviews, and SNI 1726-2019 regarding earthquake strength in buildings and non-buildings, which will then be analyzed using Etabs against these requirements, then a 3-dimensional model of the BIM-based building is created through Revit, and the use of Navisworks to plan project scheduling. It is hoped that through this Final Assignment, it can be proven that project planning will be more efficient and easier with BIM integration along with the development of infrastructure in Indonesia and can minimize weaknesses and failures during its implementation.

Fulltext View|Download

Article Metrics:

Article Info

Section: Articles

Language : ID

In Vol 3, No 3 (2025): September

Recent articles

Penggunaan Abu Serabut Kelapa Sebagai Substitusi Semen dan Tempurung Kelapa Sebagai Substitusi Agregat Kasar Perencanaan Ulang Berbasis BIM 5D pada Struktur Gedung Rumah Susun Pemerintah Kota Surakarta dengan Dual System Pengaruh Limbah Serbuk Kayu sebagai Pengganti Sekam Padi dan Bahan Tambah Limbah Polypropylene terhadap Kualitas Batu Bata Merah More recent articles

- Badan Standarisasi Nasional (2019), SNI-2847-2019 Persyaratan Beton Struktural Untuk Bangunan
Gedung dan Penjelasan. Jakarta: BSN Badan Standarisasi Nasional
- Badan Standarisasi Nasional (2019), SNI-1726-2019 Tata Cara Perencanaan Ketahanan Gempa Untuk
Struktur Bangunan Gedung dan Nongedung. Jakarta: BSN Badan Standarisasi Nasional
- Badan Standarisasi Nasional (2020), SNI-1727-2020 Beban Desain Minimum dan Kriteria Terkait Untuk
Bangunan Gedung dan Struktur Lain. Jakarta: BSN Badan Standarisasi Nasional
- Christiandava, A. R., Azzahra, A., Nurdiana, A., & Setiabudi, B. (2023). Jurnal Sipil dan Arsitektur Re-
design struktur gedung head office awann group berdasarkan integrasi BIM autodesk melalui
revit, naviswork, dan ETABS. Jurnal Sipil Dan Arsitektur, 1(1), 16–32
https://ejournal3.undip.ac.id/index.php/pilars
- Firdaus, M. A. R., Asalina, R. U., Nurdiana, A., & Setiabudi, B. (2023). Jurnal Sipil dan Arsitektur Model 5D
Gedung dekanat dan perkuliahan fakultas kesehatan masyarakat Universitas Diponegoro
https://ejournal3.undip.ac.id/index.php/pilars
- Laily, R., Sumajouw, M. D. J., & Wallah, S. E. (2019). PERENCANAAN GEDUNG TRAINING CENTER
KONSTRUKSI BETON BERTULANG 4 LANTAI DI KOTA MANADO. Jurnal Sipil Statik, 7(8), 1095–
- Lesar, V. V., Manopo, F. J., & Malingkas, G. Y. (2022). ANALISIS PROPORSI SUMBER DAYA PADA PROYEK
IRIGASI DI KABUPATEN MINAHASA SELATAN. Jurnal Ilmiah Media Engineering, 12(1), 11–20
- Mardhani, R., Ratnaningsih, A., & Arifin, S. (2022). PERENCANAAN ULANG ANGGARAN BIAYA DAN
WAKTU PELAKSANAAN GEDUNG PERKULIAHAN DENGAN MENGGUNAKAN METODE BIM
REKAYASA SIPIL, 16(2)
- Nugrahini, F., & Permana, T. (2020). Building Information Modelling (BIM) dalamTahapan Desain dan
Konstruksi di Indonesia, Peluang Dan Tantangan (Studi Kasus Perluasan T1 Bandara Juanda
Surabaya). AGREGAT, 5(2)
- PUPR. (2022). Informasi Statistik Infrastruktur PUPR . Kementerian PUPR Pusat Data dan Teknologi
Informasi
- Putera, I. G. A. A. (2022). MANFAAT BIM DALAM KONSTRUKSI GEDUNG: SUATU KAJIAN PUSTAKA I
GUSTI AGUNG ADNYANA PUTERA. Jurnal Ilmiah Teknik Sipil, 26(1), 43–52
- Ramadhani, M. R., Wahiddin, & Arystianto, D. P. (2022). ANALISIS CLASH DETECTION DAN QUANTITY
TAKE OFF BERBASIS BUILDING INFORMATION MODELLING (BIM) PADA PERENCANAAN
ULANG STRUKTUR ATAS GEDUNG LABORATORIUM DAN BENGKEL TEKNIK ELEKTRONIKA
Jurnal Online Skripsi , 3(3), 284–291. http://jos-mrk.polinema.ac.id/
- Ramdani, I., Rozandi, A., Budiman, D., & Vladimirovna, K. E. (2022). Implementasi Building Information
Modeling (BIM) Pada Proyek Perumahan. Polka Narodnogo Opolcheniya Sq, 4(1), 1
https://teslink.nusaputra.ac.id/index
- Saputra, Husni, H. R., Bayzoni, & Siregar, A. M. (2022). Penerapan Building Information Modeling (BIM)
pada bangunan gedung menggunakan software Autodesk Revit (Studi Kasus: Gedung 5 RSPTN
Universitas Lampung). JRSDD, 10(1), 15–026
- Wibowo, Purwanto, E., Ahmad, & Winarno, Y. (2020). PENGAPLIKASIAN BUILDING INFORMATION
MODELING (BIM) DALAM RANCANGAN PEMBANGUNAN GEDUNG INDUK UNIVERSITAS
AISYIYAH KARTASURA. Jurnal Matriks Teknik Sipil, 8(4). https://doi.org/10.20961/mateksi.v8i3

Last update:

No citation recorded.

Last update:

No citation recorded.

The copyright notice in the Journal of Civil and Architecture (Jurnal Sipil dan Arsitektur) confirms that all published articles, illustrations, and related content are protected by copyright. Each work displayed, be it the result of research, architectural design, or case studies in the civil and architectural fields, has a copyright owned by the author or related institution, which is marked with a symbol ©, year of publication, and the name of the copyright owner. The inclusion of this copyright notice aims to maintain the integrity of scientific works, prevent unauthorized use, and encourage respect for intellectual property rights in the academic and professional communities. We encourage readers to appreciate and cite these works appropriately.