DOI: https://doi.org/10.14710/pilars.2.4.2024.34-50

Pengaruh Penggunaan Plastik LDPE (Low Density Polyethylene) Sebagai Substitusi Aspal dan Serbuk Kaca Sebagai Substitusi Filler pada Campuran LASTON AC-WC

Ageng Surya Adjie  -  Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Indonesia, Indonesia
*Alif Nur Rizqi  -  Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Indonesia, Indonesia
Riza Susanti  -  Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Indonesia, Indonesia
Asri Nurdiana  -  Teknik Infrastruktur Sipil dan Perancangan Arsitektur, Sekolah Vokasi, Universitas Diponegoro, Indonesia, Indonesia

Citation Format:
Abstract
Road deterioration is a common problem in Indonesia, influenced by population growth, the number of vehicles, and environmental factors. LASTON (Asphalt Concrete Layer) is a type of flexible pavement consisting of a mixture of asphalt, aggregate, and filler, which requires innovation to improve its quality. The objectives of this study were to determine the marshall parameters of LASTON AC-WC mixtures added with LDPE plastic and glass powder variations, obtain the KAO (Optimum Asphalt Content) value, and find the price efficiency of Conventional LASTON AC-WC mixtures and Innovative LASTON AC-WC. The research method used was an experimental test at the Civil Engineering Laboratory of Diponegoro University Vocational School, referring to the 2018 Bina Marga standard (Revision 2). This study designed 15 samples to obtain the KAO value so that the KAO obtained from the marshall test calculation was 5.5%, as well as 27 samples to determine the optimum content of LDPE plastic and Glass Powder with variations in LDPE plastic content of 4%, 5%, and 6% by weight of asphalt and Glass Powder content of 25%, 50%, and 75% by weight of fillers. The variations were tested using hot asphalt mixtures' stability and flow test methods with marshall test equipment referring to the 2018 General Specifications. This study obtained the optimum percentage of LDPE 5% and Glass Powder 75%, which met the requirements of the 2018 General Specifications. The marshall test results show the BJ Bulk value of 2.399 T/m3, VIM 4.901%, VMA 14.063%, VFA 70.393%, Stability 2029.455 kg, Flow 2.297 mm, and MQ 868.783 kg/mm. The cost of conventional asphalt mixture material is Rp 1,046,123, while the cost of innovative asphalt mixture material is Rp 987,017; thus, the innovative asphalt mixture material is more economical, with a price difference of Rp 59,105.90/ton.
Fulltext View|Download

Article Metrics:

Article Info
Section: Articles
Language : ID
Recent articles
Pengoptimalisasian Pencahayaan Buatan pada Kamar Tidur (Studi Kasus: Kamar Kos D’Paris Putri) Pengaruh Penambahan Abu Tempurung Kelapa dan Serbuk Cangkang Telur Terhadap Kuat Tekan dan Daya Serap Paving Block Pemanfaatan Abu Sekam Padi dan Abu Boiler Kelapa Sawit Sebagai Pengganti Parsial Semen pada Pencampuran Paving Block More recent articles
  1. Hartini, H. (2020). Pemanfaatan Limbah Kaca Sebagai Filler Terhadap Karakteristik Campuran Aspal Panas (AC-WC). Jurnal MEDIA INOVASI Teknik Sipil Unidayan, 9(1)
  2. Hidayati, H. N., Rifqi, M. G., & Shofi’ul Amin, M. (2021). Pengaruh Penambahan Plastik LDPE Pada Campuran Aspal Beton Lapis AC-BC. 2(2), 1–6. http://journal.isas.or.id/index.php/JACEIT
  3. Irwansyah, I., & Ardhyan, M. Z. (2023). Pengaruh Penambahan Limbah Plastik LDPE pada Lapisan Perkerasan Jalan AC-WC. Portal: Jurnal Teknik Sipil, 15(1), 20–26
  4. Kementerian Pekerjaan Umum dan Perumahan Rakyat; Direktorat Jenderal Bina Marga. (2017). Manual Desain Perkerasan Jalan. 02
  5. Lin, K.-L., Wang, N.-F., Shie, J.-L., Lee, T.-C., & Lee, C. (2008). Elucidating the hydration properties of paste containing thin film transistor liquid crystal display waste glass. Journal of Hazardous Materials, 159(2–3), 471–475
  6. Liu, S., Wang, S., Tang, W., Hu, N., & Wei, J. (2015). Inhibitory effect of waste glass powder on ASR expansion induced by waste glass aggregate. Materials, 8(10), 6849–6862. https://doi.org/10.3390/ma8105344
  7. Pribadi, G., Indriasari, I., & Rahman, R. L. (2023). Analisis Subtitusi Limbah Plastik (LDPE) terhadap Karakteristik Marshall Pada Campuran Laston AC-WC. JURNAL KRIDATAMA SAINS DAN TEKNOLOGI, 5(02), 334–347
  8. Razak, B. A., & Erdiansa, A. (2016). Karakteristik Campuran AC-WC dengan Penambahan Limbah Plastik Low Density Polyethylene (LDPE). INTEK: Jurnal Penelitian, 3(1), 8–14
  9. Setyarini, N. L. P. S. E., Tajudin, A. N., & Pratama, J. (2019). Karakteristik marshall lapisan aus aspal beton menggunakan agregat terselimut limbah plastik LDPE (Low Density Polyethylene). Jurnal Muara Sains, Teknologi, Kedokteran Dan Ilmu Kesehatan, 3(1), 123–136
  10. Sholichin, I. (2022). PENGARUH PENAMBAHAN LIMBAH SERBUK KACA SEBAGAI FILLER MATERIAL PENGISI PADA CAMPURAN ASPHALT CONCRETE–WEARING COURSE (AC-WC). AGREGAT, 7(2)
  11. Simone, A., Mazzotta, F., Eskandarsefat, S., Sangiorgi, C., Vignali, V., Lantieri, C., & Dondi, G. (2019). Experimental application of waste glass powder filler in recycled dense-graded asphalt mixtures. Road Materials and Pavement Design, 20(3), 592–607. https://doi.org/10.1080/14680629.2017.1407818
  12. Susanti, E. D., Rifqi, M. G., Shofi’ul Amin, M., Sipil, J. T., & Banyuwangi, P. N. (2021). Pengaruh Penambahan Limbah Plastik Low Density Polyethylene Terhadap Karakteristik Campuran Laston AC-WC. 2(2), 7–13. http://journal.isas.or.id/index.php/JACEIT
  13. Wahyudi, D. (2022). PENGARUH PENGGUNAAN LIMBAH PLASTIK JENIS LOW DENSITY POLYETHYLENE (LDPE) SEBAGAI SUBSTITUSI ASPAL PADA CAMPURAN ASPAL BETON JENIS AC-WC. Abstract of Undergraduate Research, Faculty of Civil and Planning Engineering, Bung Hatta University, 1(1), 1–2
  14. Wantoro, W., Kusumaningrum, D., Setiadji, H., & Kushardjoko, W. (n.d.). PENGARUH PENAMBAHAN PLASTIK BEKAS TIPE LOW DENSITY POLYETHYLENE (LDPE) TERHADAP KINERJA CAMPURAN BERASPAL
  15. Yuniarti, R., Hasyim, H., Hariyadi, H., & Handayani, T. (2019). Penggunaan Limbah Kaca Sebagai Filler Pada Campuran Perkerasan Aspal Panas. Jurnal Teknik Sipil, 26, 265. https://doi.org/10.5614/jts.2019.26.3.10

Last update:

No citation recorded.

Last update:

No citation recorded.