slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor
PENGARUH PERBEDAAN JUMLAH CONVEX-STRIPS VORTEX GENERATOR DALAM LAJU PERPINDAHAN PANAS | Kusuma | JURNAL TEKNIK MESIN

PENGARUH PERBEDAAN JUMLAH CONVEX-STRIPS VORTEX GENERATOR DALAM LAJU PERPINDAHAN PANAS

*Nurthariq Aditya Kusuma  -  Department of Mechanical Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Syaiful Syaiful  -  Department of Mechanical Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Bambang Yunianto  -  Department of Mechanical Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

Citation Format:
Abstract

Para peneliti telah memperhatikan peningkatan perpindahan panas pada heat exchanger yang menggunakan generator vortex. Akibatnya, tujuan dari penelitian ini adalah untuk melihat bagaimana jumlah convex-strips vortex generator mempengaruhi peningkatan perpindahan panas dan resistansi aliran pada heat exchanger. Pemodelan tiga dimensi dilakukan dengan jumlah strip convex yang berbeda dari 4 hingga 8, 12 hingga 16, 20 hingga 24, dan 28. Strip convex tersebut ditempatkan di sekitar pipa panas. Model turbulen k-ε digunakan untuk mensimulasikan aliran fluida pada rentang bilangan Reynolds dari 3.438 hingga 15.926. Hasil penelitian menunjukkan bahwa fin dengan 24 convex-strips menunjukkan laju perpindahan panas tertinggi sebesar 58,45% dibandingkan dengan  plain fin.

Fulltext View|Download
Keywords: convex-strips; fin and tube; perpindahan panas; vortex generator
Article Info
Section: Articles
Language : ID
Recent articles
STUDI KEKUATAN TARIK DAN TEKUK LOCKING COMPRESSION PLATE (LCP) HASIL 3D PRINTING ANALISIS NILAI KEKERASAN DAN STRUKTUR MIKRO HASIL PENGELASAN FRICTION STIR WELDING SAMBUNGAN T-JOINT ALUMINIUM 5052-H32 DAN ALUMINIUM 7075-T651 ANALISIS PENENTUAN SCHEDULE OF MAINTNANCE PADA KOMPONEN KRITIS DUMP TRUCK KAPASITAS 60 TON MENGGUNAKAN PROBABILITY PLOT More recent articles
  1. Song, K. W., Hu, D. L., Zhang, Q., Zhang, K., Wu, X., and Wang, L. B. (2022). Thermal-hydraulic characteristic of a novel wavy fin-and-circle tube heat exchanger with concave curved vortex generators. International Journal of Heat and Mass Transfer, 194. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123023
  2. Wu, J., Liu, P., Yu, M., Liu, Z., and Liu, W. (2022). Thermo-hydraulic performance and Exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators. International Journa of Thermal Sciences, 172. https://doi.org/10.1016/j.ijthermalsci.2021.107274
  3. Tepe, A. (2021) Heat transfer enhancement of fin-tube heat exchangers using punched triangular ramp vortex
  4. generator on the fin surface. Int. J. Heat Mass Transf., 174. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121326
  5. Oh, Y., and Kim, K. (2021). Effects of position and geometry of curved vortex generators on fin-tube heat-exchanger performance characteristics. Appl. Therm. Eng., vol. 189, https://doi.org/10.1016/j.applthermaleng.2021.116736
  6. Deng, H., Teng, J., and Zhu, M. (2022). Overall cooling performance evaluation for film cooling with different winglet pairs vortex generators. Applied Thermal Engineering, 201. https://doi.org/10.1016/j.applthermaleng.2021.117731
  7. Gonül, A., Okbaz, A., & Kayaci, N. (2022). Flow optimization in a microchannel with vortex generators using genetic algorithm. Applied Thermal Engineering, 201. https://doi.org/10.1016/j.applthermaleng.2021.117738
  8. Zheng, S., Feng, Z., and Lin, Q. (2022). Numerical investigation on thermal–hydraulic characteristics in a mini-channel with trapezoidal cross-section longitudinal vortex generators. Applied Thermal Engineering, 201. https://doi.org/10.1016/j.applthermaleng.2021.11731
  9. Syaiful, Kurniawan, H. A., and Utomo, M. S. (2022). Optimal convex-strip configuration for enhancing heat transfer in fin and tue heat exchanger with field synergy principle. http://ejournal-s1.undip.ac.id/index.php/jtm
  10. Syaiful, Nabilah, H., Suryo Utomo, M. S. K. T., Suprihanto, A., and Soetanto, M. F. (2022). Numerical simulation of heat transfer enhancement from tubes surface to airflow using concave delta winglet vortex generators. Results in Engineering, 16, 100710. https://doi.org/10.1016/j.rineng.2022.100710
  11. Li, X. Y., and Li, Z. H.. (2018). Experimental study on heat transfer and pressure drop characteristics of fin-and-tube surface with four convex-strips around each tube. Int. J. Heat Mass Transf., vol. 116, pp. 1085–1095. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.076
  12. Syaiful, Syarifudin, I., Soetanto, M. F., and Bae, M. W. (2018). Numerical simulation of heat transfer augmentation in fin-and-tube heat exchanger with various number of rows of concave rectangular winglet vortex generator. MATEC Web Conf., vol. 159. https://doi.org/10.1051/matecconf/201815902012

Last update:

No citation recorded.

Last update:

No citation recorded.