skip to main content

PENGGANTIAN JEMBATAN KALIGUNG TUWEL DENGAN MENGGUNAKAN KONSTRUKSI RANGKA BAJA

*Gilar Taswindo  -  Jurusan Teknik Sipil FT. UNDIP, Indonesia
Wahyu Agung Nugroho  -  Jurusan Teknik Sipil FT. UNDIP, Indonesia
Moga Narayudha  -  Jurusan Teknik Sipil FT. UNDIP, Indonesia
Ilham Nurhuda  -  Jurusan Teknik Sipil FT. UNDIP, Indonesia

Citation Format:
Abstract
Kaligung Bridge is located in Tuwel village of Slawi in Tegal regency. The Bridge connects Bumijawa and Tuwel area and stretches along 70 meters above Kaligung river. In this project, Kaligung Tuwel bridge was designed as a steel truss system.
The design steps are as follows : analysis of the existing conditions, design the upper structure and the substructure of the bridge, and calculate budget plan ( RAB ). The Design of the upper structure considers loads such as : self weight, dead load, traffic load, wind load, and seismic load. The design was carried out using LRFD
(Load and Resistance Factor Design) method. Next, the substructure was designed by calculating the dimension of the foundation and abutment. The foundation was designed as a caisson while the abutment was of cantilever type.
Fulltext View|Download
Keywords: Replacement; Kaligung Tuwel Bridge; Steel truss; Traffic

Last update:

No citation recorded.

Last update:

No citation recorded.