skip to main content

PENERAPAN DIAGRAM KENDALI MAXIMUM MULTIVARIATE CUMULATIVE SUM (MAX-MCUSUM) PADA PENGENDALIAN KUALITAS PRODUK KACANG (Studi Kasus: Produk Kacang Garing di PT XY)

*Sintia Rizki Aprilianti  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Tatik Widiharih  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Sudarno Sudarno  -  Departemen Statistika, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia
Open Access Copyright 2021 Jurnal Gaussian under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract

Now, Statistical quality control be a particular concern to large companies.PT XY is one of the largest nut company in Indonesia that has implemented the quality standards of a product. Max-MCUSUM control chart becomes a tool that is graphically used to monitor and evaluate whether the process is under control or nut. Based on Cheng and Thaga (2005), Max-MCUSUM control chart takes precedence over detecting small shift based on average and variability in industry data. The quality characteristic of Kacang Garing will be variables, namely broken nut skin, bean seed 1, and foam nut skin. Max-MCUSUM control chart is controlled with the control limit (h) from ARL (Average Run Length) simulation of 370 is 429,69. ARL is an average of samples that need to be decribed before it goes out of control. The research continued with multivariate capability process with MCp worth 0,905 and MCpk worth 1,355. Those value indicates that Kacang Garing has met the quality specification stipulated by PT XY. Broken nut skin becomes the most dominant cause based on pareto chart and carried out analysis by using fishbone chart so that is known the main factor causing broken nut skin are machine, material, and method.

 

Note: This article has supplementary file(s).

Fulltext View|Download |  Research Instrument
Untitled
Subject
Type Research Instrument
  Download (236KB)    Indexing metadata
Keywords: Max-MCUSUM, Capability Process, Pareto Chart, Fishbone Chart.

Article Metrics:

  1. Assauri, S. 1998. Manajemen Produksi dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia
  2. Cheng, S. W., & Thaga, K. 2005. “Multivariate Max-MCUSUM Chart”. Quality Technology & Quantitative Management, Vol. 10, 221-235
  3. Haryatmi, S. dan Guritno, S. 2008. Metode Statistika Multivariat. Jakarta: Universitas Terbuka
  4. Meghan, K. C., Zhiyong, Z., & Ke-Hai, Y. 2017. “Univariate and Multivariate skewness and Kurtosis for Measuring Nonnormality: Prevelance, Influence and Estimation”. Behav Res, 49: 1716-1735
  5. Mitra, A. 2008. Fundamentals of Quality Control and Improvement, Third Edition. New Jersey: John Wiley and Sons Inc
  6. Montgomery, D. 2009. Statistical Quality Control, Sixth Edition. Singapore: John Wiley and Sons Inc
  7. Montgomery, D. 2013. Introduction to Statistical Quality Control, 8th Edition. New York: John Wiley and Sons Inc
  8. Muirhead, R. 1982. Aspect of Multivariate Statistical Theory. New York: John Wiley and Sons Inc
  9. Raissi, S. 2009. “Multivariate Process Capability Indices on The Presence of Priority for Quality Characteristics”. Journal of Industrial Engineering International, Vol. 5 No. 9, 27-36
  10. Wilkinson, L. 2006. “Revising the Pareto Chart”. The American Statistician, Vol. 60 No. 4, 332-334

Last update:

No citation recorded.

Last update:

No citation recorded.