DOI: https://doi.org/10.14710/j.gauss.14.2.390-400

ANALISIS KUALITAS STANDARD STRENGTH PADA PORTLAND COMPOSITE CEMENT DENGAN METODE CONTROL CHART DAN EVALUASI KAPABILITAS PROSES PRODUKSI

*Riza Sasmita  -  Department of Statistics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka, Air Tawar, Padang, West Sumatra, Indonesia, Indonesia
Yenni Kurniawati  -  Department of Statistics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka, Air Tawar, Padang, West Sumatra, Indonesia, Indonesia
Dina Fitria  -  Department of Statistics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka, Air Tawar, Padang, West Sumatra, Indonesia, Indonesia
Open Access Copyright 2025 Jurnal Gaussian under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract
The quality of cement products can be determined based on the results of standard strength tests, which are carried out using cube-shaped test samples through a compression testing machine. In the context of a continuously developing manufacturing industry, the demand for high-quality cement in Indonesia has also increased significantly. Therefore, it is necessary to implement production process control to ensure consistent quality that meets market needs.  The main focus of the research is on evaluating process stability and the process's ability to meet standard strength specifications using the X-bar and R control chart methods and process capability calculations. The results show that process variability is under statistical control when viewed from the R control chart, but the process average is not under statistical control, as indicated by 8 out of 21 points outside the control limits on the X-bar control chart. These points were identified as variations due to common causes inherent in the process. Nevertheless, process capability analysis showed that the process was technically capable of meeting specifications, with a Cp value of 4.35. Therefore, it was concluded that the Standard Strength production system at the company was capable despite statistical variation in the process mean.
Fulltext View|Download
Keywords: Cement Manufacturing Industry; Control Chart; Process Capability; Statistical Process Control; Standard Strength

Article Metrics:

Article Info
Section: Articles
Language : EN
Recent articles
COMPARATIVE ANALYSIS OF K-MEANS, K-MEDOIDS, AND FUZZY C-MEANS FOR CLUSTERING PROVINCES IN INDONESIA BASED ON RICE PRODUCTION IN 2024 PENERAPAN MODEL REGRESI RANDOM FOREST UNTUK PREDIKSI HARGA LAPTOP BERDASARKAN FITUR LAPTOP Efektivitas ECM - MIDAS berbasis Principal Component Analysis (PCA) dalam Memprediksi PDB di Indonesia More recent articles
  1. Abdullah (2016) ‘Kajian Rantai Pasok Semen Untuk Mendukung Investasi Infrastruktur’, Jurnal Pendidikan Kimia Universitas Riau, 1(1). Available at: https://doi.org/10.33578/jpk-unri.v1i1.3274
  2. Agusnawati, R., Nurfadillah, N., Wiradana, N. and Muktamar, A. (2024) ‘Efektivitas Evaluasi Strategi dalam Manajemen Pengendalian Mutu Organisasi’, Indonesian Journal of Innovation Multidisipliner Research, 2(1), pp. 87–105. Available at: https://doi.org/10.69693/ijim.v2i1.148
  3. Angelia Putriana, Apriliani Lase, Siti Aisyah and Apriliana Lase (2023) ‘Peran Quality Control terhadap Produk Usaha Chika Cake & Bakery di Kota Tarutung’, TOBA: Journal of Tourism, Hospitality and Destination, 2(2), pp. 50–56. Available at: https://doi.org/10.55123/toba.v2i2.4069
  4. Ayubi, A.H. Al, Ahmad and Gozali, L. (2024) ‘Perancangan Visual Control Chart untuk Meningkatkan Efisiensi Kinerja Kerja dalam Proses Produksi Harian Perusahaan Sparepat Otomotif’, Jurnal Mitra Teknik Industri, 3(2), pp. 162–170
  5. Chandrasari, S.H. and Syahrullah, Y. (2022) ‘Penerapan Statistical Process Control (SPC) dan Fault Tree Analysis (FTA) dalam Pengendalian Kualitas Plywood untuk Mengurangi Defect pada Pabrik Kayu di Purbalingga’, Jurnal Media Teknik dan Sistem Industri, 6(2), p. 107. Available at: https://doi.org/10.35194/jmtsi.v6i2.1884
  6. Dhiba, A.P. and Arsiwi, P. (2025) ‘Penerapan Metode Statistical Process Control Dalam Pengendalian Kualitas Proses Produksi Tahu’, Jurnal Teknologi dan Manajemen Industri Terapan, Vol.4 (2), pp. 140–149
  7. Fasihuddin (2025) ‘Optimalisasi Pengendalian Mutu Gypsum Menggunakan Statistical Process’, (Senastitan V)
  8. Ferdiansa, M., Rizqi, A.W. and Jufriyanto, M. (2024) ‘Implementasi Metode Lean Six Sigma dalam Meningkatkan Efisiensi Proses Produksi pada Industri Kayu CV. Jaya Abadi’, G-Tech: Jurnal Teknologi Terapan, 8(2), pp. 1307–1319. Available at: https://doi.org/10.33379/gtech.v8i2.4282
  9. Hidayat, D.F., Sutaarga, O. and Hardono, J. (2023) ‘Pengendalian Kualitas Produk Pipa Carbon Seamless Menggunakan Peta Kendali Dan Kapabilitas Proses Quality Control Of Seamless Carbon Pipe Products Using Control Chart And Capability Process’, Journal Industrial Manufacturing, 8(2), pp. 113–120
  10. Ilmi, N., Syafitri, A.A. and Wibowo, S.A. (2023) ‘Analisis Pengendalian Kualitas pada Proses Assembly Dengan Menggunakan Metode Statistical Process Control (SPC) di PT XXX Batam’, Journal of Industrial Innovation and Safety Engineering (JINSENG), 1(2), pp. 73–82. Available at: https://doi.org/10.35718/jinseng.v1i2.871
  11. Jang, Y., Ahn, Y. and Kim, H.Y. (2019) ‘Estimating Compressive Strength of Concrete Using Deep Convolutional Neural Networks with Digital Microscope Images’, Journal of Computing in Civil Engineering, 33(3), pp. 1–11. Available at: https://doi.org/10.1061/(asce)cp.1943-5487.0000837
  12. Latief, Y. and Utami, R.P. (2010) ‘Penerapan Pendekatan Metode Six Sigma Dalam Penjagaan Kualitas Pada Proyek Konstruksi’, MAKARA of Technology Series, 13(2), pp. 67–72. Available at: https://doi.org/10.7454/mst.v13i2.471
  13. Montgomery, D.C. (2013) Statistical Quality Control, Statistiqal Quality Control
  14. Nurlisa, R. and Musfiroh, I. (2022) ‘Analisis Kapabilitas Proses Produk Farmasi X Dengan Pendekatan Six SIgma Di Pt Y’, Majalah Farmasetika, 7(5), pp. 494–506. Available at: https://doi.org/10.24198/mfarmasetika.v7i4.40370
  15. Purba, H.H., Nindiani, A., Trimarjoko, A., Jaqin, C., Hasibuan, S. and Tampubolon, S. (2021) ‘Increasing Sigma levels in productivity improvement and industrial sustainability with Six Sigma methods in manufacturing industry: A systematic literature review’, Advances in Production Engineering And Management, 16(3), pp. 307–325. Available at: https://doi.org/10.14743/APEM2021.3.402
  16. Puspita, S.Z. (2018) ‘Bab II Landasan Teori’, Journal of Chemical Information and Modeling, 53(9), pp. 8–24
  17. Putri, D.E. and Rimantho, D. (2022) ‘Analisis Pengendalian Kualitas Menggunakan Kapabilitas Proses Produksi Kantong Semen’, Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(1), pp. 35–42. Available at: https://doi.org/10.30656/intech.v8i1.4385
  18. Rahayu, P. (2020) ‘Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Quality Control (SQC) di Plant D Divisi Curing PT. Gajah Tunggal, Tbk.’, Jurnal Teknik, 9(1). Available at: https://doi.org/10.31000/jt.v9i1.2278
  19. Ratnaningsih, D.J. and Lestari, L. (2020) ‘Kapabilitas Proses Kinerja Layanan Mal’, Jurnal sains dan teknologi, 1(1), pp. 1–10
  20. Rifaldi, M. and Sudarwati, W. (2024) ‘Penerapan Metode Six Sigma dan FMEA Sebagai Usaha untuk Menggurangi Cacat pada Produk Bracket’, (April 2024), pp. 1–9
  21. Rozzaqi Rachmanda, M., Novika Widjaja, F. and Prasetyo Tedjakusuma, A. (2024) ‘Pengendalian Kualitas Produk Cacat Elpiji 3 Kg dengan Menggunakan Siklus Plan Do Check Action (PDCA) pada SPPBE PSO SPPBE PSO PT. Win Med Indonesia’, Journal of Economics, Assets, and Evaluation, 1(4), pp. 1–15. Available at: https://economics.pubmedia.id/index.php/jeae
  22. Ryan, T. and Chan, L.-Y. (2004) Statistical Models and Control Charts for High-Quality Processes, Journal of Quality Technology. Available at: https://doi.org/10.1080/00224065.2004.11980268
  23. Saranga, T. (2016) ‘Upaya Meminimasi Defect Produk Bata Ringan di PT. Hebel Cipta Sarana Bumi dengan Penerapan Six Sigma dan Pendekatan DMAIC’, pp. 1–23
  24. Sekartaji, N. and Sumartono, B.A. (2021) ‘Analisis Pengendalian Kualitas Produk Damper Speaker Type D-25236 B Menggunakan Metode Six Sigma Guna Meminimalisir Produk Cacat Pada PT.X’, Jurnal …, pp. 117–139. Available at: https://journal.universitassuryadarma.ac.id/index.php/jtin/article/view/811
  25. Sihombing, V. and Bangun, B. (2024) ‘Optimisasi Proses Bisnis dengan Menggunakan Metode Six Sigma Berbasis Teknologi Informasi’, 4(September), pp. 37–41
  26. Skorupińska, E., Hitka, M. and Sydor, M. (2024) ‘Surveying Quality Management Methodologies in Wooden Furniture Production’, Systems, 12(2), pp. 1–17. Available at: https://doi.org/10.3390/systems12020051
  27. Solehan, M. (2022) ‘Analisis Pengendalian Kualitas Produk Kain Menggunakan Pendekatan Statistical Processing Control (SPC)’, Jurusan Teknik Industri Fakultas Teknologi Industri Institut Sains dan Teknologi Akprind Yogyakarta 2022. [Preprint]
  28. Suharyanto, Herlina, R.L. and Mulyana, A. (2022) ‘Analisis Pengendalian Kualitas Produk Waring Dengan Metode Seven Tools Di Cv. Kas Sumedang’, Jurnal TEDC, 16(1), pp. 37–49
  29. Sundana, S. and Aristawidya, R. (2024) ‘Analisis Pengendalian Kualitas Produk X di PT ABC’, 6(1), pp. 6–14
  30. Yulia Wilda, Meiliati, H., Rafsanjani, M.A. and Rahadi, F. (2023) ‘Analisis Pengendalian Mutu Crude Palm Kernel Oil (CPKO) Dengan Menggunakan Metode Statical Statistical Quality Control (SQC)’, Jurnal Teknologi dan Manajemen Industri Terapan, 2(2), pp. 119–127. Available at: https://doi.org/10.55826/tmit.v2i2.71

Last update:

No citation recorded.

Last update:

No citation recorded.