skip to main content

PENGENDALIAN KUALITAS PRODUK MINO DI HOME INDUSTRY “SARANG SARI” BANYUMAS

*Winahyu Handayani  -  Departemen Statistika, FSM, Universitas Diponegoro, Indonesia
Tatik Widiharih  -  Departemen Statistika, FSM, Universitas Diponegoro, Indonesia
Budi Warsito  -  Departemen Statistika, FSM, Universitas Diponegoro, Indonesia
Open Access Copyright 2021 Jurnal Gaussian under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract

Mino is Banyumas’s signature souvenir that is fancied by the public. High competitiveness makes mino manufacturers are prosecuted to improve the quality of their products. One of the ways to ascertain whether a product has a good quality is by looking at the number of defective products, the less the number of defective products the better the quality. The objective of the study is to minimize broken and burnt products and also size faultiness of the mino. Control Charts   and R are used to view defectiveness data from mino’s diameter and mino’s weight respectively, where as Control Chart p is used to see the data of burnt and broken mino. Furthermore, the value of process capability (Cpk) used to review whether the process is considered capable or not capable. The result and analysis at “Sarang Sari” Nopia and Mino’s Home Industry Banyumas show attribute data in the form of broken and burned defects is restrained after eliminating seven observations data. Thereupon, the variable data in the form of mino’s weight data is restrained after omitting the three observations data with Cpk value is 1.1180, and for mino’s diameter data process has been restrained with Cpk value of 0.9559. Factors that are affecting mino’s defectiveness are equipment, method and measurement. Meanwhile, the profit value of this mino home industry business is Rp 9.276.110 per month.

 

Keywords: Mino, Chart Control, Process Capability, Economic Analysis

Fulltext View|Download
Keywords: Mino, Chart Control, Process Capability, Economic Analysis

Article Metrics:

  1. Ariani, D.W. 2004. Pengendalian Kualitas Statistik (Pendekatan Kuantitatif dalam Manajemen Kualitas). Andi, Yogyakarta
  2. Daniel, W.W. (1978). Applied Non Parametric Statistics. United States of America: WS-KENT Publishing Company
  3. Montgomery, D.C. 1996. Pengantar Pengendalian Kualitas Statistik. Alih bahasa: Zanzawi Soejoeti. Gadjah Mada University Press, Yogyakarta. Terjemahan dari: Introduction to Statistical Quality Control
  4. ________________. 2009. Introduction to Statistical Quality Control, Sixth Edition. John Wiley&Sons, Inc, United States of America
  5. Wibowo, H. Sulastri, dan Emy, K. 2013. Quality Control Analysis Into Decrease the Level Defects on Cofee Product. 2nd International Conference on Engineering and Technology Development (ICTD 2013). ISSN 2301 – 6590

Last update:

No citation recorded.

Last update:

No citation recorded.